Audi a4 b6 front bumper removal

Article Navigation:

Photo

:: MEDIASERVANT.INFO :: - The Premiere Audi A4 Modification Guide and Pictures Library

Video

RELATED PAGES

Aug 19, Audi A4 - b6 front bumper removal - has anyone removed their a4 B6 front bumper if so, where exactly r the bolts and clicks? thx.

You should remove these on both sides (6 all together). B6 Audi A4 - Front Bumper Removal. Driver Side, Passenger Side. After the headlights are out, and you.

How to put an Audi A4 into service position. Detailed illustrated Audi A4 front bumper removal instructions. Blauparts wants to assist with your Audi A4 timing belt.

Do this for both sides of the car duh. Here is how to remove the front bumper cover on your B6 generation Audi A4. Do I need to purchase the entire unit? The bumper in this photo is from an UltraSport A4 and while it looks different then a regular A4 bumper, everything is mounted exactly the same. Comments Dillon

Audi A4 B6 Bumper Replacement | Removal And Installation | Happy Wrenching

Here is how to remove the front bumper cover on your B6 generation Audi A4. The bumper in this photo is from an UltraSport A4 and while it looks different then a regular A4 bumper, everything is mounted exactly the same. Start by removing the lower grille. Just pull the tab down and remove the plastic part.

Do the same for the other side. Loosen the allen bolt that connects to the shock absorber. Remove any clips or bolts holding the belly pan to the bumper not all of them are shown in the photo. To remove the bolts, use a screw driver and rotate degrees. Remove the wheels to get access to the fender liner. Remove the clips and torx bolts that secure the fender liner.

There are a couple more bolts at the top of the wheel well that are not shown in this photo. Do this for both sides of the car duh. Peel back the fender liner and remove the last torx bolt along with three nuts that hold the bumper arrows. Do both sides of the car. Use something flat like a screwdriver to disengage the bottom portion of the bumper from the guide circled in red and slide the bumper forward a little.

Before you can fully remove the bumper you will have to disconnect two electrical plugs and the headlight washer line it's a quick disconnect fitting so undo the clip and pull out the line. With everything disconnected you can now remove the bumper. Make sure you replace the green o-ring around the headlight washer line. If you reuse it, there is a good chance that it will leak at the quick disconnect.

Ask me how I know: Torque the big allen bolts to 26NM or 19 lb-ft. Torque the bumper nuts one ones behind the fender liner to 4NM or 3 lb-ft. E-mail required, but will not display. Notify me of follow-up comments. Blog Service Guides Audi A4. F Focus Mustang Fusion. Comments Dillon Is it a matter of just clipping it on and screwing it back in place.

Nelson Fok Do I need to purchase the entire unit? How do you get the vehicles parts on the original front bumper to the new one? Here, too, I like how they write news The number of users of the platform has increased from 2 million, which were at the beginning of the year, to 10 million today, according to Bloomberg. Have BNB tokens on the account - that's all it takes!!!

How To Remove Front Bumper Cover Audi A4 2005-07